Pool Materials: The Italian Advantage

Pool Materials The Italian Advantage

Pool projects require materials that can withstand the elements. Atlantic Link offers high-end, practical pool materials that provide these technical solutions. Our pool materials include thin porcelain slabs, marble and stone and customized glass mosaic tiles.

Thin Porcelain Slabs (Lea Ceramiche)

Slimtech PoolSlimtech is an ideal covering for swimming pools which have specific hygienic and architectural requirements. Here are the benefits of Slimtech for pools:

  1. Resistant to chlorine and chemical agents.
  2. Resistant to thermal shock.
  3. No water absorption.
  4. High frost resistance.
  5. Light and easy to install.
  6. Colors are resistant to sunlight and aging.
  7. Resistant to atmospheric agents.
  8. Easy to clean.

Marble & Stone (Marmi Faedo)

Grolla Marble PoolGrolla Marble is extracted in the Cornedo-Valdagno Valley (Vicenza), from the marble quarry owned by the Faedo Family. Grolla Marble is available in various color tonalities and surface finishes, making it suitable to the many uses, including pools.

Grolla Marble is an ideal choice for the cladding of fountains and pools, because it can withstand prolonged direct contact with water or pool chemicals. Marble is not only available in cladding, but also as customized solid pieces in almost endless dimensions.

 

Customized Glass Mosiacs (Mosaico+)

Glass Mosaic PoolCustomized glass mosaic tiles add a distinctive look to pools. In Europe, these tiles can be found throughout the entire pool. The Mosaico+ Concerto collection is made of glass mosaic chips that provide personality to pools and spas. Concerto is part of a large group, called the Colore collections, which consists of several whole color collections in bright or natural shades.

These three materials, thin porcelain slabs, marble and stone, and customized glass mosaics, can also be used in combination for a pool project.

Atlantic Link can consult on which materials are most suitable for your project and, through a network of importers and distributors, ensure shorter lead times and on-time deliveries. To learn more, here is a convenient form for contacting Atlantic Link.

REFERENCES:

http://www.ceramichelea.it/en/solutions/tiles-installation-swimming-pools/

http://www.ceramichelea.it/wp-content/uploads/2015/06/RP15.0-LEA-Tiles-Installation-Swimming-Pools.pdf

http://www.marmifaedo.com/en/pools/

http://www.mosaicopiu.it/en/article/naturally-waters-edge Read more

The Grolla Marble Legacy

The Grolla Marble Legacy

Grolla Marble comes from the earth, produced by the forces of nature over time. Grolla Marble’s technical mechanical characteristics make the material particularly resistant to frost, atmospheric agents, and salt water and is appropriate for several outdoor uses. In addition to these characteristics, Grolla Marble offers natural beauty and legacy.

According to Marmi Faedo, Atlantic Link’s supplier for Grolla Marble to the US, this marble is,

…not just an outstanding material, but an extraordinary wealth of memory, a key to interpretation of the transformations, history and changes that have affected the area.

The people at Marmi Faedo understand the importance of carefully managing this natural resource which comes from a quarry located on a mountain not far from the company’s headquarters.

To understand the legacy of Grolla Marble, one must get to know the quarry and the family that owns and manages it.

About the Family & Company

The Grolla Marble is extracted in the Cornedo-Valdagno Valley (Vicenza), from the marble quarry owned by the Faedo Family for three generations. Angelo Faedo, the great-grandfather of the present day CEO Nicola Faedo, was an employee at the quarry over 60 years ago. Angelo took on more responsibilities, and now the quarry is owned by his family. Today there are 30 employees.

The family behind Marmi Faedo are:

  • Nicola Faedo, the CEO. He is responsible for sales and marketing.
  • Alessandro Faedo, Owner and Nicola’s father. He knows how to harvest stone from the quarry.
  • Isa Marri, takes care of office work and Nicola’s mother.
  • Francesca Faedo, also takes care of office work and Nicola’s daughter.

Over the past 60 years, Marmi Faedo has expanded from offering marble tiles and slabs to include other marble materials. In order to add value, they created huge custom pieces, and took advantage of unique properties of the materials. Today they create façades, rainscreens, and custom bathtubs.

About the Quarry & Grolla Marble

When people visit the quarry, they are most surprised by the beauty of the material, and the ability of the employees to extract the material from the earth and preserve its beauty.

Grolla marble’s beauty is timeless and can be seen in projects of historical value as well as significant modern-day projects.

Historical buildings with Grolla Marble

  • Patrick’s Cathedral in New York City
  • “Liston” Piazza Brà in the Verona Arena
  • “Italia” theatre (interior and exterior) in Venice
  • Columns in Piazza DeI Signori in Vicenza
  • The basement of Duomo in Vicenza

Modern projects by Marmi Faedo

  • Sheraton Hotel in Algeria
  • Bank branch in Russia
  • Directional building in Washington DC
  • International City in Lyone (interior and exterior) project made by Renzo Piano
  • Lungo viale and plaza in Lido of Venice
  • Central Bank in Canada

To learn more about Grolla Marble, see also Grolla Marble for Outdoor Use. If you want to learn more about Grolla Marble for your project, here is a convenient form for contacting Atlantic Link.

REFERENCE: http://www.marmifaedo.com/en/our-marble/

How an Innovative Process Creates a Revolutionary Thin Porcelain

Slimtech Production Process

Lea Ceramiche, Atlantic Link’s partner in providing thin porcelain tile (3mm) from Italy to the U.S. market, uses a multi-step production process where quality checks are applied to adhere to the company’s high standards.

Here is a summary of the steps involved in creating thin porcelain.

Step 1: Raw Materials Handling

The finished tile consists of three basic materials:

  1. Clays
  2. Sands
  3. Feldspars

Before these materials are accepted at the facility, they undergo rigorous quality checks. Once the materials pass the company’s specified standards, they are routed to separate storage silos in a covered area of the factory.

When the time comes to use the raw materials, each raw material making up the required mix is checked for quality and consistency by an automatic computerized weighing and dispensing system that will deliver the exact amount of each ingredient.

The weighing and dispensing system conveys the raw materials to a grinding bay. Here they are fed into what’s known as a Continuous Mill. The resulting mixture is known in the industry as “slip” (a fine paste comprised of some 30% moisture content).

Next the slip is atomized. During this step, the liquid suspension is forced at high pressure into a drying chamber where it is dispersed as a fine spray. The resultant dry powder is known as atomized dust.

Step 2: Pressing and Decorating

The atomized dust is loaded into a hopper, passed through a sieve to remove any impurities, and then delivered to dispensers at the beginning of the production line. At this stage the tile is given its first surface decoration.

Next is the pressing phase. The state-of-the-art hydraulic press is the key element. It is one of the few presses in the whole world able to make large 3 by 1 meter ceramic slabs. During pressing all of the air contained between the granules of the dust-mix is expelled. The result is a smaller, highly compacted tile body. Upon leaving the press, the jagged edges of the tile body are trimmed.

The slabs are then rolled by conveyor belt to the drying tunnel where, upon exit, the slabs will have a residual humidity of 5%.

The last stage of this step is a digital decoration technique. The production line employs latest generation decoration equipment. Seven silk-screen Rotocolor printers apply background dyes, a range of graphic designs and protective surface glazes. These are combined with an innovative digital ink-jet printer with 6 print-head bars. Each bar can carry a different colour pigment, meaning that up to 6 colours can be applied. The ink-jet printer operates like a plotter making repeated passes over the slab as required.

This process ensures high-resolution patterns or pictures. There’s no limit to the graphic designs possible. The line also caters for smaller formats.

Step 3: Kiln Firing and Slab Holding Bay

The thin slabs are fired in natural gas kilns with special gas burners. The slabs are fired for 35 minutes at an extremely high temperature of 1210 C (2210 F!).

The cooling phase is a very crucial phase where care must be exercised to ensure the resulting slabs are perfectly flat, exactly the right size and with no internal stress.

This firing and cooling phase consumes less energy and releases fewer pollutants and less CO2 into the atmosphere. Also, most of the electric energy used is generated by the heat of the gas kiln and only occasionally is purchased from the grid.

The fired ceramic slabs are automatically removed and stacked on special racks. The loaded racks are then transported by laser-guided vehicles (LGVs) to their allocated place in the warehouse where they will be retrieved for finishing as per customer orders.

Step 4: Finishing and Slab Selection

At the gluing line, a fibreglass underlayer is glued to the bottom of the slab. This backing considerably improves the tile’s mechanical strength and affords excellent bending and shock resistance.

The tile-cutting line handles all slab types, with or without the fibreglass backing. On exiting the firing kiln, the ceramic slab is 3070×1040 mm in size. It is now snap-cut to the exact format size of 3000×1000 mm or smaller.

Once tiles reach the final selection line, they undergo a further quality check by automatic sizing machines. A last visual inspection of each tile surface is also made by expert operators before the slabs pass to the packing and dispatch bays.

Lea’s holding company, Panariagroup, confirms its commitment to its mission of Excellence, Research and Innovation with the aim of developing new product lines and forward-thinking solutions to meet ever more demanding customer expectations. The company is committed to maintaining Italian style excellence in tiles and that is just one reason Atlantic Link is pleased to offer these tiles to the U.S.

If you are interested in learning about how Slimtech tiles could benefit your project, here is a convenient form for contacting Atlantic Link.

REFERENCE: http://www.ceramichelea.it/en/what-is-slimtech/slimtech-production-process/